Primers
|
 335-DF Series
Dry-Fall Primer
|
335-DF Series is a 2-K Inorganic Zinc Primer that cathodically protects steel and provides outstanding abrasion resistance and protection against undercutting and corrosion in normal to severe atmospheric conditions - all in a Dry-Fall formula. |
325-R Series
Dry-Fall Primer
|
325-R Series is a high performance 2-K zinc-rich epoxy primer in a Dry-Fall formula. It provides outstanding abrasion resistance and protection against undercutting and corrosion by cathodic protection. |
325-SC Series
Dry-Fall Primer
|
325-SC Series has all of the properties of the 325-DF Series, and meets South Coast Air Quality VOC requirements of 100 g/L. |
475-R Series
Dry-Fall Primer
|
475-R Series is a high performance Dry-Fall 2-K polyamine epoxy primer. It is a surface tolerant primer that may be applied over tightly bonded rust or mill scale and offers outstanding chemical, water, weathering, and corrosion protection. 475 is also an excellent tie coat when used between a zinc rich primer and the topcoat of your choice. Now available in pre-reduced formulas.
|
|
475 SC Series Dry-Fall Primer |
475-SC Series has all of the properties of the 475 Series, and meets South Coast Air Quality VOC requirements of 100 g/L. |
84 Series
Dry-Fall Primer
|
84 Series phenolic modified alkyd is a Dry-Fall structural primer that is surface tolerant and features an elaborate system of rust inhibitors to assure outstanding corrosion protection even in rugged climatic environments. It also provides maximum adhesion and corrosion protection on areas with limited surface preparation. 84 Series may be top coated with a wide range of topcoats: alkyds, silicone alkyds, acrylics, epoxies, and urethanes. |
Direct-to-Metal
|
485-R Series
Dry-Fall DTM
|
485 Series polyamine epoxy is a surface tolerant Dry-Fall direct-to-metal formula that may be applied over tightly bonded rust or mill scale and offers outstanding chemical, water, weathering and corrosion protection. Now available in pre-reduced formulas. |
|
485-SC Series Polyamine Epoxy Dry-Fall DTM |
485 SC Series has all of the properties of the 485 Series, and meets South Coast Air Quality VOC requirements of 100 g/L. |
Topcoats
|
|
HiShield 68R Series Dry-Fall Topcoat |
68R Series aliphatic urethane topcoat provides a deep automotive “Wet Look”, ultimate color purity, flexibility, UV and corrosion protection even when exposed to a variety of harsh climatic and chemical environments - all in a Dry-Fall formula that eliminates paint overspray worries! 68 Series should be used on areas where the highest durability and outstanding aesthetics are required. Now available in pre-reduced formulas. |
|
HiShield 68-SC Series Dry-Fall Topcoat |
68-SC Series has all of the properties of the 68 Series, and meets South Coast Air Quality VOC requirements of 100 g/L. |
720 Series
Dry-Fall Topcoat
|
720 Series is a single package modified silicone alkyd topcoat with excellent color purity and gloss retention. For a high gloss finish at a more economical cost than a urethane, this is a great choice. |
|
720-SC Series Dry-Fall Topcoat |
720-SC Series has all of the properties of the 720 Series, and meets South Coast Air Quality VOC requirements of 100 g/L. |
65R Series
Dry-Fall Topcoat
|
65R Series is an extremely fast drying modified acrylic topcoat with outstanding gloss and weathering properties at an economical price. It will not retain gloss and color purity as long as the 68 Series urethane, but it is very durable and will provide years of protection for large plants, trailers, equipment and vehicles. |
|
* Technical Data Sheets are available on all products at www.highland-international.com *
|
