Highland International

HiTemp Primers
HiTemp 880 Series HiBuild 1200°F Primer	880 Series silicone copolymer primer is a high build formula that provides the heat stability and flexibility to handle continual thermal shock operating conditions. 880 Series Primer was developed specifically to work in conjunction with the 885-HS Series Topcoat, also rated at 1200°F, to provide a primer/topcoat system for components requiring high performance and aesthetic appeal up to 1200°F. NOTE: This product heat cures at 250°F.
HiTemp 15-ZN Series 1000°F Primer	The 15-ZN Series 2-K silicone zinc primer cathodically protects steel and is designed for heat affected zones up to 1000°F. NOTE: This product heat cures at 250°F.
335 Series 750°F Primer	335 Series is a 2-K inorganic zinc primer that cathodically protects steel and provides outstanding abrasion resistance and protection against undercutting and corrosion in normal to severe atmospheric conditions.
Chem-Temp 47 Series 500°F Primer	47 Series is a 2-K Hybrid Epoxy Novolac specifically formulated to alleviate extensive surface prep while providing excellent temperature and chemical resistance. NOTE: With proper reduction, it may be modified for application direct to hot surfaces up to 400°F.
HiTemp 48 Series Insulation 450°F Primer	48 Series Hybrid Epoxy Novolac insulation primer is a high build 2-K product that provides exceptional temperature insulation and heat reduction properties, as well as excellent chemical and corrosion protection. It is an excellent choice for priming under insulation. When applied at 10-16 mils DFT on 450°F surfaces, it will lower this surface temperature by 120°F-140°F. NOTE: With proper reducer selection, 48 Series may be applied to hot surfaces up to 350°F.

HiTemp Direct to Metal Coatings (DTM)
HiTemp 899 Series HiBuild 1200°F DTM	899 Series is a high build direct-to-metal silicone copolymer coating that may be applied up to 16 mils DFT in two coats. This remarkable product offers premium protection for high heat areas up to 1200°F while maintaining superior color retention in a complete range of color choices. This product provides the corrosion protection, flexibility to withstand continual thermal shock operating conditions, heat resistance, and durability of a primer/topcoat system in an unprecedented 1-step application. 899 Series is also available in a hot application formula. NOTE: This product heat cures at 250°F.
Chem-Temp 47 Series 500°F DTM	47 Series 2-K Hybrid Epoxy Novolac is a high build DTM that helps to eliminate extensive surface preparation and provides exceptional temperature and chemical protection. It is designed to be applied to surfaces which operate under insulation. When applied and cured properly, it will also withstand acidic, caustic, and high heat environments up to 500°F. With proper reduction, it may also be modified to be applied directly to hot surfaces up to 400°F.
HiTemp Topcoats
HiTemp 885-HS Series 1200°F Topcoat	885 Series silicone copolymer topcoat is a remarkable product for plants and/or components that experience temperatures from 250°F to 1200°F. 885 Series Topcoat was developed specifically to work in conjunction with 880 Series Primer, also rated at 1200°F, to provide a primer/topcoat system for components requiring high performance and aesthetic appeal. It also offers the flexibility to withstand continual thermal shock operating conditions. 885-HS is available in a full range of colors and has outstanding color retention up to 1200°F. 885 Series is available in a hot application formula. NOTE: This product heat cures at 250°F.
HiTemp 815 Series 500°F Topcoat	815 Series acrylic silicone topcoat is an excellent alternative for components ranging from ambient to 500°F and is available in a full range of colors. 815 Series may also be modified with the proper reducer to allow hot application up to 400°F.

HiTemp Primers

HiTemp Direct to Metal Coatings (DTM)

HiTemp Topcoats