Highland International

Primers
335 Series Primer	335 Series is a 2-K inorganic zinc primer that cathodically protects steel and provides outstanding abrasion resistance and protection against undercutting and corrosion in normal to severe atmospheric conditions.
325 Series Primer	325 Series is a high performance 2-K zinc-rich epoxy primer. It provides outstanding abrasion resistance and protection against undercutting and corrosion by cathodic protection.
325 SC Series Primer	325 SC Series has all of the properties of the 325 Series, and meets South Coast Air Quality VOC requirements of 100 g/L.
HiGrip 97-HF Series Primer	97-HF Series epoxy mastic is a high solids (70%) 2-K primer specifically formulated to alleviate extensive surface preparation. It may be applied over minimally prepared surfaces: rusty steel and deteriorated previously painted surfaces. It dries to a semi-gloss finish and may be applied up to 8 mils DFT per coat. A complex rust inhibitor and resin system assures excellent corrosion protection. It is also an excellent tie coat when used between zinc rich primers and the topcoat of your choice.
HiGrip 77 Series Primer	77 Series is a 2-K polyamide adduct epoxy primer specifically formulated to alleviate extensive surface preparation. It may be applied over minimally prepared surfaces: rusty steel and deteriorated previously painted surfaces. It dries to a flat finish and may be applied up to 6 mils DFT per coat. A complex rust inhibitor and resin system assures excellent corrosion protection. 77 Series can be used as a tie coat between zinc rich primers and the topcoat of your choice.
35 Series Sanding Primer	35 Series is a fast drying single package modified phenolic alkyd primer specifically formulated to meet 3.5 lbs per gallon VOC. Its off-white or buff color allows single coat coverage when topcoated with bright lead-free colors. 35 Series has a complex 4-part rust inhibitor system that works to offer outstanding chemical and corrosion resistance. It may be topcoated with a variety of topcoats.
26 Series Primer-Sealer	26 Series is a high solids multi-purpose modified phenolic alkyd coating designed to seal previously primed surfaces; however; due to its superior rust inhibitive properties it can be applied directly to metal as a prime coat. 26 Series’ exceptional leveling properties and dry time is specifically designed for use at the OEM level. It may be topcoated with a variety of products including urethanes, epoxies, acrylics, and alkyds.
84-LH Series Primer	84-LH Series phenolic modified alkyd is a structural primer that is surface tolerant and features an elaborate system of rust inhibitors to assure outstanding corrosion protection even in rugged climatic environments. It also provides maximum adhesion and corrosion protection on areas with limited surface preparation. 84 Series may be topcoated with a wide range of topcoats: alkyds, silicone alkyds, acrylics, epoxies, and urethanes.
Direct-to-Metal
Aero-Shield 61 Series DTM	61 Series aliphatic copolymer urethane is a 2-K direct-to-metal coating that offers ultimate gloss and color retention, adhesion, durability, and corrosion protection all in one coat! It is ideal for metal buildings and structural steel where high performance, durability and ease of application is desired. 61 Series is available in a full range of colors and finishes.
HiGrip 97-HF Series DTM	97-HF Series epoxy mastic is a high solids (70%) 2-K direct-to-metal coating specifically formulated to alleviate extensive surface preparation. It can be applied over minimally prepared surfaces: rusty steel and deteriorated previously painted surfaces. It dries to a semi-gloss finish and may be applied up to 8 mils DFT per coat. A complex rust inhibitor and resin system assures excellent corrosion protection in a single coat system.
HiGrip 77 Series DTM	77 Series is a 2-K polyamide adduct epoxy DTM specifically formulated to alleviate extensive surface preparation. It can be applied over minimally prepared surfaces: rusty steel and deteriorated previously painted surfaces. It dries to a flat finish and may be applied up to 6 mils DFT per coat. A complex rust inhibitor and resin system assures excellent corrosion protection.
53 Series DTM	53 Series modified acrylic is an extremely fast drying single package DTM that has been specifically formulated for use at OEM facilities where quick handling of painted equipment is a necessity. It may be applied over marginally prepared surfaces: light rust and mill scale. 53 Series exhibits excellent durability, color retention, and corrosion protection. Urethane modifier 34-ALH-100 may be added to enhance durability and hardness.
Topcoats
HiShield 64 Series Topcoat	64 Series aliphatic urethane topcoat has a deep automotive “Wet Look” that exceeds conventional polyurethane enamels as it maintains its fresh painted look, durability and film flexibility for years. 64 Series is a high solids product that also offers outstanding coverage rates. This is the product of choice for the transportation industry.
HiCryl 37 Series Topcoat	37 Series is a single package acrylic alkyd topcoat that offers an automotive finish in one coat. Its high solids content guarantees an outstanding coverage rate. You may also choose to add a urethane hardener for this formula to enhance the overall durability.
775 Series Topcoat	775 Series is a single package silicone alkyd topcoat that is limited to 2.8 lbs VOC per gallon. Due to the high silicone content and UV stable pigmentation, 775 Series maintains exceptional gloss and color purity even in rugged industrial and atmospheric environments. These qualities are greatly enhanced when used with its partner Urethane Modifier 775-ALH-100.
HiGlo 150C Series Alkyd Topcoat	150C Series is a high performance topcoat offering premium corrosion protection, gloss retention, and color retention when compared to generically similar products. It is an inexpensive durable coating to be used on structural steel, varying plant components, quarries, and transportation equipment. Its outstanding color retention is due to high quality pigmentation. Partner urethane modifier 34-ALH-100 may be added to enhance durability and hardness.
HiGlo 150-28 Series Alkyd Topcoat	150-28 Series has all the properties of the 150C Series, and has been specifically formulated to meet 2.8 lb per gallon VOC requirements.
* Technical Data Sheets are available on all products at www.highland-international.com *

Primers

Direct-to-Metal

Topcoats