Industry Specific Products
Click here to return to the home page.Product PagesCurrent product specialsProduct newsResearch and DevelopmentAbout Highland InternationalContact Highland InternationalRequest brochures & color chart.

Highland's High Performance Industrial Paints for Plants with Harsh and Abrasive Environments:

Ready Mix Plants
Mines and Quarries
Feed and Grain Mills and Elevators

Industrial facilities require coatings that are more resistant to the corrosion, chemicals, abrasion and harsh weather conditions, such as those mentioned above, have found excellent results with Highland paints. They are rugged, durable, and made to withstand tough environments. Whether you choose our High Performance Standard Application Paints or our High Performance Dry-Fall Paints, we will help you select the product best suited for your needs and budget.

Highland High Performance Dry-Fall Paints allow spray applications without the danger of paint over spray damaging nearby trucks and equipment. The over spray dries to a powder within 10-20 feet from the point of application and wipes away without chemicals or buffing. Our Dry-Fall coatings are 4 times faster to apply than brush and roll application, greatly reducing labor cost and plant down time. Highland is your only source fro High Performance Dry-Fall 2-K Epoxy and High Performance Dry-Fall 2-K Acrylic Urethane.

Select one of our paint systems below to see our recommended applications.

 

SYSTEM #4: BEST PAINT SYSTEM FOR READY MIX PLANTS, QUARIES & MINES, POWER PLANTS, FEED & GRAIN MILLS AND ELEVATORS, ETC.

Primers:

77 Series Direct to Metal Epoxy (May e used as a DTM or Primer)
80 or 84 Series Structural Primer

Topcoats:

36 Series High Performance Polyurethane Topcoat fro best performance
150C Series High Performance Alkyd Enamel for more economical Topcoat

Options:

34A100 Urethane Modifier for 150C Topcoat: Provides added durability

 

SYSTEM #5 HIGH PERFORMANCE DRY-FALL PAINT SYSTEM FOR READY MIX PLANTS, QUARRIES & MINES, POWER PLANTS, FEED & GRAIN MILLS AND ELEVATORS, ETC.

1-Coat System with Eggshell Finish

485C Series Dry-Fall 2-K Epoxy DTM when gloss finish is not required

OR

 

2-Coat System with High Gloss Finish

 

Primers:

475C Series Dry-Fall 2-K Epoxy Primer for best results

 

45 Series Dry-Fall Acrylic Primer for a more economical system

TopCoats:

68 Series Dry-Fall Acrylic Urethane Topcoat for superior performance

 

65C Series Dry-Fall Acrylic Topcoat for a more economical system.

 

 

 

Industry Specific Products

Generic Types

Environment Categories

Highland International
465 Industrial Park Drive
Boone, NC 28607

Phone: 828-265-2513
Toll Free: 800-444-1438
Fax: 828-265-2712
EMAIL